Ask Experts Questions for FREE Help !
Ask
    catherinebodine's Avatar
    catherinebodine Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 1, 2014, 02:25 PM
    Replace union that broke because of corrosion
    There's a section that was corroded and when trying to remove it, it broke. This piece appears to be a connection of sort. It lays between the faucet and the back wall. Since it snapped I can't grip the separate section that goes into wall. I need help.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Apr 1, 2014, 04:13 PM
    Hi Cathrine

    If you look inside the "separate section" you should see a hex shaped hole that should allow you to put a large ALLEN WRENCH inside to loosen the bad part. If you do not see a hex shaped hole in the part then you may need to purchase a pair of water pump pliers (see image) and try to get a grip on the part using that tool. If you do not have enough strength in your hands you may need to enlist the help of a male friend or neighbor, but the pliers should get the part loosened so you can try to find a replacement part, OK? I do not expect that finding a replacement for this will be easy if even possible, but for sure you'll need a brand name or I wouldn't even bother and I'd simply replace the faucet entirely!

    If you post a picture I can tell you a lot more!

    Good luck!

    Mark
    Attached Images
     
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Apr 1, 2014, 05:21 PM
    I am guessing they are talking about a brass trap arm that has corroded. Picture would sure help.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Apr 1, 2014, 06:34 PM
    Replace union that broke
    It lays between the faucet and the back wall
    Since it snapped I can't grip the separate section that goes into wall
    Sure sounds like a wall mounted faucet to me, but you know Brian, ya never do know..LOL!! Always appreciate another perspective...you just never know on this site, huh??

    Hopefully, Catherine returns!!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ive got a 1996 ford windstar lx my rear shock right side broke and to replace with ne [ 1 Answers ]

Rear shock right side is broken it's the life shocks that have a donut and keep the van level under certain loads. Im wondering if I can replace the shocks with a standard shocks? please advise thanks.

Is pex a good option to replace copper pipes due to suspected corrosion? [ 0 Answers ]

Bath spout broke in half while trying to replace. How can I get the other piece off [ 1 Answers ]

The bath spout snapped in half while I was trying to replace. Still attached to the wall is a metal surround I chipped 1 tile off to see if I could get it off but no luck I have tried monkey wrench & multidrips it just won't budge. The house is 55 years old and has copper pipes... It seems to...

Can union member start union shop [ 4 Answers ]

Can a union member open a union shop?

G9T08012UPB13C Coleman furnace inducer wheel broke, just replace or is problem larger [ 18 Answers ]

My model # G9T08012UPB13C furnace inducer motor started making a horrible sound. I turned the unit off. I pulled the motor and opened the wheel housing to find the wheel was still attached to the motors spindle, but the edge of the wheel had been damaged and was scraping the side of the housing,...

View more questions Search