Ask Experts Questions for FREE Help !
Ask
    peterfox's Avatar
    peterfox Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2013, 02:04 PM
    Replace tap washer
    Bath tap washer needs replacing. But when I use the adjustable wrench the whole tap is turning & I can't loosen the nut. Is there a solution to this problem?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Feb 10, 2013, 03:17 PM
    What brand and style is your faucet? If you can post some pics of the unit and tell which nut you are trying to loosen, we may be able to help out. Take care.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My outside tap is dripping how do I change the washer to stop drip? [ 4 Answers ]

My outside tap is dripping. Do I need to change washer? How do I change the washer in the tap?

How do I remove spindle from shower to change washer and reseat tap? [ 1 Answers ]

How to I remove spindle from shower taps to change washer and reseat taps?

I have 12g wire with 20amp breaker for my washer. I want to tap into that receptacle [ 4 Answers ]

Wanting to add another receptacle to run my tub and another to run my TV and computer. Obviously the tub and washer will not be running at the same time. Is this OK to do?

How do I get the washer off the pipe so I can replace it with a new washer and nut [ 2 Answers ]

Can you replace plug type tap with a quarter turn ceramic [ 3 Answers ]

I am doing a shower renovation and have removed the old plug type tap and replaced it with a quarter turn cermaic tap. I am using the same screw connection that was set into the wall for the plug type tap. I have found that when they ceramic tap has been fitted water flows through the shower even...

View more questions Search