Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace copper with flex-tubing under k-sink, replace faucet
[ 13 Answers ]
I need a new faucet in the kitchen. Old lines are copper and sweated in. Can a novice do-it-yourselfer change the copper lines to flex-steel, and put in a new faucet, or do we need a plumber? We are willing to learn.. Where can I find detailed information on how to do it? Step by step?
Tub spigot
[ 2 Answers ]
I am in the process of remodeling my bathroom. I have a question regarding the tub spigot. How do I remove it? I have read that it turns off and some even have a set screw. Now here is my problem... first, there is no set screw. Second, I cannot seem to turn the spigot off. It is the kind...
Outside spigot
[ 4 Answers ]
I have an outdoor spigot that that water comes out of the handle when it is turned on. How do I properly pack it?
Outside Spigot
[ 4 Answers ]
I have three outside spigots I want to replace. How do I tell if they are screwed on or soldered (sp) on? With it flush to the brick I can't see and I don't want to twist it off. The pipe is copper so I'm guessing soldered. It is not a no freeze spigot. How do I replace them with a screw on...
Outside spigot
[ 1 Answers ]
We have two outside spigots, one on either side of the house. The water is turned on and one works and one does not. The knob turns but no water comes out. What could be the problem? View more questions Search
|