Hi, I am trying to reconnect the floor shifter to the transmission, which was connected and worked before. The floor shifter inside will not move the cable underneath the car. I can see where the cable comes through the floor, there's not much cable and I don't see any damage to it. It's connected...

My problem is that the water continues to run out of the tub when the drain is closed. I have attempted to adjust the linkage, however I can't stop it from running out. I feel I amy not be adjusting it properly. Can you help?

I've just installed a new Flo-Jet, 11-12 H.P. L-Head carb on an older 11 hp Craftsman tractor. In the process I inadverently knocked the shorter linkage off the throttle control bracket (the other end than the carb end). Is there a handy diagram you know of that clearly shows where the hooked end...

How can I remove an old waste plug from a bathtub triplever kit if the if the metal cross inside the old one is broke and the wrench made for it has nothing to grab onto?

I have a 95 wrangler. I am having trouble engaging first and reverse on a manual. You really have to shake the shifter to get it in gear. It only happens on 1st and R, is this a problem with my linnkage in my shifter.