Ask Experts Questions for FREE Help !
Ask
    lvles's Avatar
    lvles Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2008, 02:29 PM
    Removal of Friedrich Grohe shower faucet
    I recently purchased a 14 year old home. I have two Friedrich Grohe shower faucets. Both are malfunctioning. The first has very low water flow. The other has luke warm water at high hot setting.

    Each faucet has a plastic ring with temperature ring on it. I would like to pull the valve on the one with low water flow. The outer knob adjusts temperature, and the inner lever controls volume.

    I've removed the cap over the stem. Now, I'm at the plastic ring. I'm afraid to pry harder for fear that I will break the platic ring. I'm stuck. How do I disassemlbe this thing.

    Lost in Las Vegas
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Sep 16, 2008, 08:32 PM
    Post photo of the faucet...
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Jul 6, 2011, 09:57 AM

    Supertetreault: This is 3 years old conversation. Don't piggy back. Start your own thread...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low flow Grohe Ladylux faucet [ 6 Answers ]

I would like to know how to get the screen out of the pull out handle of my Ladylux (not cafe) kitchen faucet. Water flow is 1 gal/min (hot and cold) and I understand that it should be 2.2 gal/min ,

Need to replace 'O' rings and Gaskets in Delta Faucet [ 1 Answers ]

My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you

Shower Faucet Removal [ 3 Answers ]

I am demoing my small bathroom. But I have been unable to get the little buttons over the screws holding the handles on, off. What can I do to pop these buttons off?? Bathroom is about 20 years old and I don't think these handles have ever been removed. Please help?

MY new friedrich ac isn't cooling my apartment.what might be the cause? [ 1 Answers ]

I just purchased a 13,500 BTU ac for my apt. it's it the living room. However it doesn't seem to be cooling anything. It actually feels more humid than anythig. I have read the manual several times and called customer service (but they were gone for the day) so if anyone can help me with this...

Water suppressor needed on lavatory faucet and shower faucet? [ 1 Answers ]

Are water suppressors needed in the bathroom sink faucet and the shower stub out also? And can you just use a length of pipe on a T, or must you use those copper chambers? (cpvc system) thanks

View more questions Search