Ask Experts Questions for FREE Help !
Ask
    ed edwards's Avatar
    ed edwards Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2017, 06:40 AM
    Pvc detection
    I have a home built in 1986, need to know where the pvc water line is located.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Apr 26, 2017, 05:25 PM
    If city water, contact your water service utility or look at spec plans for the house. If a well, may have a more difficult time. Is there a meter box? Can you see where the water line enters the house? Usually it is a pretty straight line.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Apr 27, 2017, 05:48 AM
    Plastic PVC Pipe Locators

    Or if a straight run, cut pcv, run a metal fishtape and locate with less expensive metal or wire locators?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the difference between Solid Core PVC pipe and PVC [ 1 Answers ]

What is the difference between Solid Core PVC pipe and PVC schedule 40 pipe?

3 inch white pvc cannot connect to black pvc [ 3 Answers ]

I have waste line, black abs under mobile home and needed to replace a section, bought white pvc, I thought the black was 3 inch and I bought 3 inch pvc, but the White is larger in diameter by just a little but enough so you cannot cement together, is there a bushing or a transition piece to...

Should I use cemented PVC or PVC sections for main sewer line? [ 5 Answers ]

I'm replacing the main sewer line for my 1850's house located in Quebec, hence cold winters and the risk of shifting due to freeze thaw cycles. The line was previously replaced, and is now a series of three feet long 6 inch concrete sections connected together. I was planning on installing PVC...

How do join half inch PVC Pipe to 1 1/2 PVC [ 1 Answers ]

I am replacing a 1 1/2" tub drain with a 2" shower drain. The existing 1 1/2 PVC Tub Drain leads into 2 " on the main sewer line. Is three a way to remove the 1 2/2 line (maybe ream out the 1 1/2 pipe thats fitted into the 2 "??

Replace sch 40 pvc to cast iron saddle 4 in pvc pipe broke [ 4 Answers ]

Replace sch 40 pvc into cast iron saddle with lead pvc pipe broke off even with lead packing what is the easiest way to remove pvc and lead to replace it

View more questions Search