My irrigation system requires the well pump psi to be set above 30 psi on the low end or else it drains the well. Once I cut the power and remove the cover to the Pumptrol switch, I turned down (clockwise) the center spring loaded screw down (the higher one upon which the cover was affixed). That...

I have a Square D Pumptol switch on the pump/pressure tank at my new house. I've never worked with any of this technology before; it's my first home purchase (yay!) and the only home I've ever lived in that didn't have city water. The pressure switch cuts off successfully at about 55 psi, but...

Hi there guys, I know it's a little late to check on it, but today I ran the square around the room(getting ready for cabinets) and found out that one of my corners is way out of square. I ran a straight line and found the problem to be that one wall dips away as it runs towards the corner. ...

I have an air compressor with a square d pumptrol pressure regulator. The compressor stops at 100psi, and restarts at 60psi. How do i adjust the pressure regulator to restart at approx 80psi, without changing the shutoff press?

While watering my garden or lawn my pumptrol box shuts off... and I have to push contacts together due to complete loss in water pressure. Pump comes back on and water pressure is right there so I know I am not running out of water and I checked blatter tank for air pressure... tank was full with...