I lose water pressure at least once a day. The pressure switch is new. Water pressure will drop to 20psi and I have no water pressure. I then lift the lever on the switch and the pump operates at the 30 to 50psi like it should. I drained the bladder tank and made sure it has the 28 psi recommended....

I own a large acre property and am having some plumbing issues. I’ll try and explain this best I can. The Old System: Water was pumped out of the well, through a pressure tank, a holding tank, and then a couple hundred feet up a hill to a 5000 gallon metal tank. From here the water was...

I am trying to wire a new switch to my pool pump it is a 230 volt. I have a new switch( 240v 30amp double pole single throw), but I do not know how to connect the wires. I have a red a white and a black wire and a bare wire. The is no designation on the switch as to where which wire should go...

I live in a older home in a small rural town with a shallow well in the basement. I recently replaced the pump (it was leaking). The old pump was also cycling on and off sometimes very fast (chattering) both at cut off and cut on pressure. When I replaced the pump it seemed to fix it for a while...

I am trying to increase my water system pressure to the minimum required 40 PSI to feed my reverse osmosis drinking water filter. However, the 33 gallon pressure tank for my well pump system says it is pre-charged at 30 PSI and that the cut in pressure for my pump should be set equal to that 30...