Ask Experts Questions for FREE Help !
Ask
    arnie55's Avatar
    arnie55 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2010, 05:13 PM
    Ptrap and sing drain not aligned c
    My new vanity/sink does not align with my prtap and it looks to me like everything is glued with pvc cement. Can I cut the drain pipe of my sink and install one of the short acordian pices to fix this or will it clog easily? Also my top of the pvc is 1and 1/2 inches how can I increasd the acordian pice to 1and 1/2 it is 1 and 1/4
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jan 3, 2010, 05:20 PM
    Hi arnie:

    You'd be best to purchase an 1.5" x 1.25" nut and washer to transition over to the 1.25" flexi. tailpiece.

    Since the tailpiece is 1.25" from the sink you will need this nut either way... ;)

    I have never had any issues with the flexi. Tailpiece.

    Go for it!

    MARK
    arnie55's Avatar
    arnie55 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 3, 2010, 05:23 PM

    [IMG]C:\Users\ron\Documents\IMG00001[/IMG]here are my pictures
    C:\Users\ron\Documents\IMG00001
    C:\Users\ron\Documents\IMG00002
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Jan 3, 2010, 05:37 PM
    Pictures didn't post... did you see post #2?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The ptrap? [ 4 Answers ]

What exactly is the ptrap? What does it look like?

Sing Sing Prison [ 2 Answers ]

Is there a list anywhere that list all the people who were executed at Sing Sing Prison.

Ptrap requirement for shower [ 1 Answers ]

I removed a tub unit in a house.I built a shower in its place,the ptrap from the tub was removed and my worker forgot to put one back.The shower has a cement pan in,and its tiled,the customer says there is a smell from the drain.There is no access panel under the cabinet,is there anything that I...

Installing PTrap [ 1 Answers ]

I have about a 1" stub of exposed PVC piping to work with. Should I install a coupling and another PCV pipe before gluing on the slip connector, so I have pipe to work with in case I need to in the future, or just glue the slip connector onto the 1" stub? Or should I do something different before...

Washing machine drain Ptrap [ 4 Answers ]

My washing machine water exhaust tube is connected to a verticle drain pipe for water outflow. At the bottom of this pipe, there appears to be a P-trap section. Attached to the P-trap is a tube that runs all the way up the roof and also down to the ground. It believe that the tube that goes to the...

View more questions Search