Ask Experts Questions for FREE Help !
Ask
    ELISABETH72's Avatar
    ELISABETH72 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2007, 08:12 AM
    Price Pfister shower
    I purchased a price pfister shower kit and it did not have an installation manual. They are closed today and their website does not have manuals on it. I just need to know how to install the valve. Can some one direct me to a site that will give me that info?
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Jan 21, 2007, 10:19 PM
    Go to pricepfister.com
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jan 22, 2007, 10:53 AM
    What is it that you wish to know? If you have a shower valve in place all you should have to do is first shut the water off and remove the old valve. I would keep the old shower raiser and head and just reploace the valve itself.
    It is most likely soldered in. If you don't have the equipment and skills to unsolder it and replace the valve you're going to have to call in outside help. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Price Pfister 26 Series Faucet [ 4 Answers ]

I recently intalled a Price Pfister 26 series kitchen faucet. The faucet seems to work correctly, except that the flow out the faucet is low. Also, the flow from the spray nozzle is greater than from the faucet. I have checked the system pressure to be 40 to 50 psi, so I know that is not the...

Price Pfister New Installation [ 2 Answers ]

New construction - shower stall only, no tub. Price Pfister single handle control for shower. Not enough hot water as shower is cool, not warm or hot. Plumber was fired for other stupid stunts but now I need to warm up shower water temperature. Does Price Pfister have valve that is adjustable in...

Tub/ shower leaking. Price Pfister valve question. [ 4 Answers ]

Hi! We have an old Price Pfister Tub and shower faucet. It has been dripping for some time now and I would like to replace the whole thing with something newer anyway. If at all possible I would like to do it myself. I have been doing some research and have found that the new OX8 valves have a...

Price pfister [ 2 Answers ]

Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper

Bd and ask price [ 1 Answers ]

Why we would see sometimes that the bid is lower than the asked price and vice versa?

View more questions Search