Ask Experts Questions for FREE Help !
    rayfoucher's Avatar
    rayfoucher Posts: 1, Reputation: 1
    New Member

    Feb 2, 2010, 01:49 PM
    Plumbing questions answered
    I have connected some pex pipe to the proper pex fittings with the proper crimp tool and copper rings. They seemed to be on good but now I and am finding that the pipe will rotate on the fitting. Does that mean that the pipe-fitting join will leak when I fill the system or can the pipe rotate on the fitting like that and still seal?

Check out some similar questions!

Plumbing questions answered [ 1 Answers ]

I appear to have a problem with my hot water. The hot water throughout my house will not stay hot. I turn on the hot water in my bathrooms and kitchen and the water stays hot for a minute or so and then gradually becomes cold. I have checked my hot water heater which appears to be working fine. ...

Plumbing questions answered [ 1 Answers ]

Is it OK to connect a lavatory drain to the overflow pipe on the tub? Tub and sink are back to back.

Plumbing questions answered [ 1 Answers ]

We removed the toilet in our master bathroom to do some tiling. Once done, we were not able to install the toilet back because a piece of the flange had broken off. We decided to buy a new toilet (that uses less water) and called a plumber to put a new flange down and install the new toilet. It...

Plumbing questions answered [ 1 Answers ]

When I run my bathroom sink my tub drain backs up with water. Need some help on a solution? Doug

Plumbing questions answered [ 1 Answers ]

My hot water is far to powerful in the shower can I put a valve in the line between mains pressure cylnder and the shower?

View more questions Search

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.