Ask Experts Questions for FREE Help !
Ask
    voodoodave's Avatar
    voodoodave Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 21, 2012, 07:33 PM
    Plumber questions
    Ever since I have lived in my house the master bath toilet has never worked very well, (easily clogs, slow flow/flush action, etc) After several years of this I went into basement to check out pipes and notice that the initial downpipe from toilet flow to a pipe that slopes well for about 5 feet then turns 90 degrees and then has a upslope for about 2-3 feet. (Checked with 3' level) Could the upslope be the cause of the disfunctional toilet? If so, should I have a plumber re-install the line?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 21, 2012, 07:57 PM
    Quite possible with an upslope. I would pull the toilet and pour water down through the floor flange. If the water backs up you have your answer. It could be trapped debris too.
    On any event, the pipe should always slope down. What is the pipe material?
    voodoodave's Avatar
    voodoodave Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Nov 21, 2012, 09:03 PM
    Material is PVC
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Nov 22, 2012, 06:43 AM
    Well, the good thing is that it is easy to work with. If you have decent DIY skills this is not a daunting task. 1/8" drop per foot.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #5

    Nov 22, 2012, 07:42 AM
    That "upslope" In your drain line gave you a built in running trap. This would cause back pressure and give you the problems that you now have. Follow Brians advice and have it redone with proper slope. Good luck, Tomk
    voodoodave's Avatar
    voodoodave Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Nov 23, 2012, 08:52 PM
    Quote Originally Posted by ma0641 View Post
    Well, the good thing is that it is easy to work with. If you have decent DIY skills this is not a daunting task. 1/8" drop per foot.
    Thank you very much
    voodoodave's Avatar
    voodoodave Posts: 4, Reputation: 1
    New Member
    		  
    #7

    Nov 23, 2012, 08:53 PM
    Quote Originally Posted by speedball1 View Post
    That "upslope" In your drain line gave you a built in running trap. This would cause back pressure and give you the problems that you now have. Follow Brians advice and have it redone with proper slope. Good luck, Tomk
    Thank you very much
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ask a Plumber [ 5 Answers ]

Just had a new Whirlpool gas oven delivered and was told they could not install because our old oven was hooked up with brass flex to flex connection through a partition(floor) and that was not code. Wanted to know if that was correct or if we have to hire a plumber to change out the brass flex to...

Plumber [ 1 Answers ]

My toilet tank won't fill up after each flush.. its making a whisp noice and I. have to fill it up myself

Plumber questions calcium build-up [ 7 Answers ]

I have calcium build-up in sewer line reducing capacity. Will flooding the line with vinegar work and how long should it take?

Do I need a plumber? [ 8 Answers ]

The shower head is leaking badly. Do I need a plumber or can I fix it myself?

View more questions Search