Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How can I move my P-Trap and piping to line up with new sink?
[ 10 Answers ]
I'm replacing my kitchen sink and although it's the same size, the drain holes in the old sink were near the front and the drain holes in the new sink are near the back. Anyway, the P-Trap is forward about 8 inches or so. I was told I can simply cut the pipe coming out of the wall and refit it to...
Double trap OK? Rough in piping + tub trap
[ 10 Answers ]
The way the 2" rough in went we ended up with a trap of sorts then a pipe to where the tub trap will be. Not completed yet. Just wondering if a tub trap and a trap made with the rough in piping will cause some sort of problem. The rough in trap was made off a 4x4x2 wye. Would that be adequate...
Cutting into clay sewer piping
[ 1 Answers ]
Hello, We are experiencing root problems in our main drain line. I dug up the stretch of pipe that has the worst root intrusion so I can install a 2 way clean-out in order to snake both directions if we have any further problems. Right now my run to the street is like 150' so I don't want to dig...
White vs Black pvc Sewer Piping
[ 2 Answers ]
In 3" pvc sewer piping What is the difference between the white and the black? Can you mix the two in the same sewer run? My house is 30 or so years old, I have both white and black in the same run (white horizontal and black vertical) it was that way from the day I bought it some 8 years... View more questions Search
|