We have two toilets with offset flanges. They back up more often than one would like. A plumber said the only way to improve that problem is to install a power flush toilet. We don't mind doing that, but wonder if it will do the trick. Our floors are made of flagstone so I suspect it wouldn't be...

I am replacing a toilet and need to move the waste line about 1 inch. How can I install an offset toil flange over existing one. Can I glue a new pvc offset flange into existing toilet flange / wasteline? My wasteline is 3" PVC.

Hi, I have a rough in of 15" for the toilet I just removed. I am trying to install an offset closet flange to get my new toilet a couple inches closer to the wall, but the new flange is 4" and my drain (or whatever it's called) into the ground is also 4". How do I get the offset flange in the...

The 2x10 floor joist in right in the middle of where I want the center of the flange to be, how much of the floor joist can I legally remove so the offset flange will fit?

Installing a toilet in a new basement bathroom. Center of 4: PVC drain pipe is 13.5" from the wall, so I tried to use an offset flange, made by Oatey Caspers. It was a snug fit, so I did some sanding with sandpaper and emery cloth, applied the cement and tapped it down, but could not get it in...