Ask Experts Questions for FREE Help !
Ask
    teric's Avatar
    teric Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2013, 08:43 AM
    No water and jet pump not working
    Last night went to wash hands and no water. Well is in the basement so I went down and could smell the pump burning so turned off the power to the pump and waited until morning so the pump could cool down. This monrning went and checked the pump for prime and it was primed the bladder tank was empty, turned the power back on and nothing the pump did not turn on. What is going on and what should I start checking
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Apr 21, 2013, 09:55 AM
    If circuit breaker is on and you have power to pump, then pump motor has burned out and needs to be replaced.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a 1hp jet pump to replace a 1/2 hp jet pump. Is that all right [ 2 Answers ]

Is it OK tp replace a 1/2 hp jet pump with a 1hp jet pump. I'm worried about it being to powerful.

Jet pump water pressure [ 5 Answers ]

I just purchased a home and the water was turned off. I have a jet pump and primed it properly and turned it on. The problem is the pump runs, good pressure (50 psi) the pump will run and pressure will remain for approximately 10 minutes and then it bottoms out and I have no water again. I am...

Jet well water pump will not shut off [ 1 Answers ]

Have a shallow dug well. The well ran completely dry. Before I realized it, used all of the water in system including hot water tank.Finally got water in well -2 months later.Had to prime pump to get water. Couldn't gt the primer plug out so had to take hose off the pressure tank to prime. Now...

I can't get my jet pump to prime and my foot valve is working correctly [ 1 Answers ]

5 days ago my hubby was drilling holes for a garage and hit our water line he repaired the break in the feed and return line, we tried to prime the pump and we cannot get the pressure to build like it should. We have checked to repairs to make sure they are not leaking... nothing 5 days later we...

View more questions Search