I have a Jackson water heater and I need to replace the element but there is drain valve so how do I drain it?
Add your answer here.
Check out some similar questions!
Leaking hot water heater drain valve after new brass valve installed [ 2 Answers ]
I had a leaking (plastic) drain valve on my GE hot water heater. It was leaking from the inside of the valve. The small rubber washer was crimped. I installed a new brass drain valve that I purchased from home depot using teflon tape. The valve now leaks from the threads of the tank/valve. I...
How to drain a water heater with no drain valve [ 3 Answers ]
I need to replace the heating element. I shut off the breaker to the pump and to the water heater and opened the hot tap in the tub until it ran dry - no more water coming out but when I started to remove the heating element, water started pouring out. I know I can attach a hose to the drain...
Plastic drain valve on water heater. [ 11 Answers ]
Hi there. I'd like to replace the white plastic drain valve on my GE water heater with a brass fixture so I can drain it regularly. Before I replace the valve, I got to drain the tank. I've never used one of these plastic drains before. Every tank I've had has had a metal spigot. This plastic valve...
Hot Water Heater Leaky Drain Valve [ 5 Answers ]
The Drain Valve on my Hot Water Heater is Leaking rather badly. Is there anything I can do to correct this short of replacing the Hot Water Heater. This Hot Water Heater is approximately 8 to 10 years old. Thanks
Leaking drain valve on water heater [ 2 Answers ]
I have a slow drip on the drain valve on my water heater. We've flushed the water heater about a month ago, but now we have a very slow drip from the drain valve. It's dripping at a rate of about 2 cups a week, no matter how tightly we turn the knob on the valve. Any ideas?
View more questions Search