Ask Experts Questions for FREE Help !
Ask
    timv128's Avatar
    timv128 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 1, 2009, 01:18 PM
    Newlec calypso plus
    Hello there, It's my first time of posting , so please be gentle. I have a Newlec calypso plus shower which has severely reduced pressure, Even on the cold setting and turn the handset upside down, it goes about two inches out of the thing, the main problem is that if you turn the water up hotter, the flow gets so slow, right up to the point where if you turn it up to anything over two thirds heat, no water at all comes out... any help would be HUGELY accepted...
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Jul 1, 2009, 04:02 PM

    Have you checked to make sure the shower head is not plugged. Remove shower head and let us know what kind of pressure you get.

    If this doesn't solve the problem, I will need a pick of you your faucet(im not familiar with this brand). May be a plugged cartridge.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Calypso washer will not drain [ 4 Answers ]

Model #110.22062102 I have read about many problems with this type washer and it not draining. I have opened it up and cleaned out all the hoses (lots of lint and 4 underwires... ) and also pulled the pump (didn't find anything in here and it seems to turn free) twice! I have also checked the...

Kenmore Calypso Washer [ 1 Answers ]

I have a Kenmore Elite Washer with the Caypso Agitator. The washer will go through the wash cycle but will not go into the rinse/spin cycle. The digital display flashes "FL". How to resolve? Also, can the unit be forced to pump the water from the drum without proceeding through a complete cycle?


View more questions Search