I am in the process of removing an existing shower tray. I am having difficulty in removing the drain. It does not appear to screw in. I have access to from below if I need to cut pvc pipe. This appears to be the only thing keeping my tray in place at this time.

Hi Am building a shower and require the height of the taps and the shower head

I am replacing my concrete-tile shower with swanstone 32x60L shower base. The new drain location will be around 4" away from the original drain location. What should I do? Can I use the existing P-trap with the new drain location by connecting them using a horizontal PVC pipe? Or do I have to...

I have been noticing some wetness aroundthe outside of my stall shower. It is a Tile shower in a ranch type house on a slab. I looked carefully at all the grout on the floor and resealed the corners but that did not help. I thought it might be the drain but can only get the top off. The other has...

Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line...