Hello, My current problem is I have cast iron plumbing in a concrete floor in a basement. Once the walls were finished and the new travertine floor in I noticed that the center of the toilet flange was only about 10.5" from the wall. This would make it a little tight on the left side when...

I am replacing my toilet and found that the cast iron toilet flange is broken where one of the bolts that hold the toilet should go. This was a crescent shaped slot, but the outer rim is broken and missing. I was going to replace the flange, but can't see how it is fastened to the drain pipe. ...

Hello all, I call this thread the speed bump because when I dug out my basement floor to replace an upstream section of cast iron pipe with new pvc pipe for a bathroom and to move my stack, the downstream attachemtn to the cast iron pipe is now giving me some mild trouble. The cross section of...

Hi, I have read forums on having the cast iron toilet flange being too high after tile removal. I have some additional questions on this: 1. After removing the Thick set Mortar, the flange is 1 " above the subfloor. Can I just add different types of underlayment to reach the flange (i.e....

I have a stand alone shower on a slab foundation that leaked I pulled the floor out and the cast iron flange for the liner is in bad shape and needs to be replaced. How do I go about this and where do I get the parts.