Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No Hot Water in Shower - Moen Single Handle Faucet
[ 38 Answers ]
I've read most of the questions on this website about this matter, but I'm still confused. I pulled off the handle and wall plate. But what do I do after that? I see a small (4 inch approx.) hole in the wall with a "unit" that looks like a cartridge that holds the handle. I can turn it to hot...
Moen one handle , pressure prob.
[ 16 Answers ]
Hi, I have a MOEN faucet , ever since I installed it I was never happy with the pressure , now after 8 years it seemed worse so I took it apart to see if the screens were dirty , nothing there , when the handle is not on the flexible hose , I turn on water and I notice that when on the cold side ,...
Removing handle from a Moen single-handle shower
[ 5 Answers ]
The shower is dripping and I am trying to get to the stem by removing the handle. I can see a set screw recessed into the bottom of the handle. I have tried an allen wrench but bent it without any success.
Replacing single handle bathtub handle with 2 handles
[ 1 Answers ]
Hi, I am redoing the tile in my bathroom and want to change my single handle hot/cold fixture with a 2 handle fixture... Can I do this myself or do I need a plumber?. My house was built in the 1960's and the faucet seem original.. I do have access from the back and will have access in front once...
Moen faucet diverter
[ 2 Answers ]
I have a 12 year old Moen single lever faucet in my kitchen. About one week ago, it started showing signs of a problem. When I turn it on after it hasn't been used for an hour or two, the water pressure is very low, almost none. If I turn it on and off a few times, then the pressure gets better.... View more questions Search
|