 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hello, I replaced the mixet 4 1/2" stem valve ,Its not wanting to work properly and in the instructions it says the "red dot" goes "up".. The replacement kit I got from home depot didn't have a red dot to be found or a small chennel in the brass. Any ideas on how to go about making sure the stem is...
I am trying to replace a leaking Mixet shower faucet. I've somewhat successfully removed the knob by breaking it off. Now I cannot remove the mixing handle/lever. The new one I purchased has a set screw. The original one does not yet it will not budge off the stem so I can get at the hex nut to...
How to completely change a Mixet shower faucet
Hi, The Mixet valve in my shower stall needs replacement since turning the temperature control handle is very difficult. The valve stem will not pull out using max force with channel pliers (padded), I can turn the brass screw adjustor and out comes the front part but that leaves the rear...
I recently had a leak in my shower and replaced the Mixet cartridge which seemingly fixed the problem, but now the dial/handle seems unresponsive and isn't opening or shutting the valve. I can open it and close it by turning the handle screw with a screw driver, but that doesn't seem like a good...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
