Ask Experts Questions for FREE Help !
Ask
    dek1116's Avatar
    dek1116 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 15, 2010, 10:46 PM
    Manabloc pressure problems
    I have a Manabloc system installed in my house. I am experiencing low water pressure to every fixture inside the house. I am on city water and have checked the incoming water source and found it working with plenty of pressure. So the source is good. I also checked for leaks in the attic where the PEX lines are installed. This just happened a few hours ago. Had no water pressure problems earlier in the day. Any suggestions as to what might be the cause?
    CHayn's Avatar
    CHayn Posts: 177, Reputation: 10
    Junior Member
     
    #2

    May 16, 2010, 06:21 AM

    Do you have a water softener? Whole House Filter? If so, bypass and check your pressure again. If no improvement, leave in bypass and remove an aerator from a faucet and try again. Orange beads in the aerator? If so, you need a new softener.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressure problems [ 4 Answers ]

Kitchen sink with dual handles and sprayer. Turn water on by turning handle and get no water from faucet but when you press the sprayer you get water. What is the problem and how do I fix this?

Water pressure problems [ 4 Answers ]

I am on city water but have a 1300 foot water line, the water pressure was horrible so I installed a water pump and pressure tank, is there any way I can do away with this and just install a pressure booster inline? This pump is installed in my garage and is a constant worry in winter about...

Water pressure problems [ 3 Answers ]

Water pressure in shower only (no tub) went way down this morning. Have never had water pressure problems before. Don't think I have a leak all other faucets in same bathroom have great pressure...

Water pressure problems [ 2 Answers ]

My water preasure (new house) seems OK for normal things, showers, sinks, appliances but there is not enough pressure to push small sprinkler zone, bath tub has very low out put, hose very low out put, anything that uses a large amount of water. If these are turned on the sinks and appliances...


View more questions Search