Ask Experts Questions for FREE Help !
Ask
    duffles's Avatar
    duffles Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 10, 2012, 10:18 PM
    low pressure on hot water
    have 40 gal power vent, 2007, have had to disconnect line @ top of unit to remove sediment x 5 because of low pressure, this time 0 results, only a dribble, even tried reverse h2o hammer, what?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 11, 2012, 06:37 AM
    I'm having a problem understanding your problem.
    have had to disconnect line @ top of unit
    What line? Hot or cold? What is "sediment x 5"?
    even tried reverse h2o hammer,
    Please explain.
    Is it your complaint that you have zero pressure on
    1- The entire house?
    2- All the hot water faucets?
    3- Some of the hot water faucets?
    Please post back with more details. Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low hot water pressure after new hot water heater installation [ 6 Answers ]

I had a new hot water heater installed and now the upstairs hot water pressure is very poor. Cold water pressure is fine. House is 8 years old. What can I do to fix this myself, if possible, anything simple?

Low hot water pressure on a kitchen sink, good cold water pressure [ 4 Answers ]

I have a single faucet sink where the cold water pressure is fine and all other sinks have good hot and cold water pressure. I replaced the kitchen faucet two years ago along with new lines. As of late I'm getting very little hot water pressure along with having to run the water for about 10...

Hot Water Heater - Low pressure only on Hot Water side [ 7 Answers ]

My hot water starts with full pressure then quickly reduces flow to trickle at all household faucets. Already flushed water heater twice. Flow comes back temporarily once tank refills, then peters out again. No muck or discoloration in water. Cold water side has full pressure (even when Hot water...

Low hot water pressure to tub (only) after replacing hot water tank [ 1 Answers ]

I just replaced my hot water tank and installed a new one. Now, the hot water pressure in the shower/bathtub (only) is weak - all other faucets seem normal, and the cold water in the shower is fine. Water pressure was fine before I replaced the tank, the problems with the old one were that the...

I have very low hot water pressure from my hot water heafrom an electric water heater [ 0 Answers ]

I have very low water pressure from my hot water heater. I can't find anything wrong.. any ideas?


View more questions Search