 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low Hot Water Pressure using Tankless Heater
Hi,
Our pressure tank had to be replaced this week and now our Paloma 12W-DP won't work properly. The hot water pressure is minimal and will only light the heater one out of every 10 tries depending on how much water is the pressure tank. We have cleaned both cold water intake and hot water output hoses on the tank. Increased our new pressure tank to 45 psi as well with no luck. We've spent hours trying to make this work. There is no faucet that is working properly. Is there a way to increase the water pressure to the heater? Any other solutions before we buy a new one? |
||||
Check out some similar questions!
I had a new hot water heater installed and now the upstairs hot water pressure is very poor. Cold water pressure is fine. House is 8 years old. What can I do to fix this myself, if possible, anything simple?
My hot water starts with full pressure then quickly reduces flow to trickle at all household faucets. Already flushed water heater twice. Flow comes back temporarily once tank refills, then peters out again. No muck or discoloration in water. Cold water side has full pressure (even when Hot water...
Hot water pressure is low hot water comes and goes the electric heater is 27 yrs old cold water pressure is fine
I have very low water pressure from my hot water heater. I can't find anything wrong.. any ideas?
Hi guys, here is my problem. I bought a Titan tankless water heater ( SCR2 N-100 ) and installed it which wasn't too difficult. After the installation the heater work fine ,except the pressure from the hot water side is very weak, the cold water pressure to the rest of the house is fine. Now Iv'e...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
