Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove single valve handle - Delta Shower
[ 48 Answers ]
I've got the Seats & Springs to fix a leaky Delta Monitor 1400 Series faucet (and the water is turned off), and am stuck at the very beginning. The handle is a single lever, it appears that the Set Screw is missing. I've tried twisting the lever and pulling without success - not knowing which is...
Dripping single handle delta bathtub faucet
[ 1 Answers ]
Have any ideas on how I repair this dripping problem? I have an indication that I need to replace a washer or "O" ring, but don't know how to get to those pieces. Help
Delta single handle shower removal
[ 2 Answers ]
I have to replace a cartridge in a delta single handle shower. It is a one piece lever. It has a set screw on the inside bend of the handle. I have removed the set screw and the hard water corrosion will not break allowing the handle to pull off. I have tried boiling hot vinegar, along with a...
Dripping Delta Single-handle kitchen faucet
[ 2 Answers ]
I have a single-handle Delta kitchen faucet that will not stop dripping. I did some research online and learned to buy a replacement kit to replace the interior workings of the faucet. I have done that, and have replaced every interior part, both O-rings, the springs and seals (which I am told is...
Delta two handle faucet
[ 1 Answers ]
I have a Delta two handle knob faucet in my bathroom. It had a very irritating leak so I purchased knew knobs and replacement parts at Lowe's. I replaced everything down the seats and springs... (except I think what's called the stem) At first, when I turned the water supply back on, the water... View more questions Search
|