 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Leak below tank, how to replace the gasket
I have a mancesa 1.6 gpf model as well, I placed on new bolts from tank to base. Then placed on new flapper, I feel moisture under the lid base despite the bolts being very tight. I think the issue is the gasket at the base. Does anyone know how to redo the gasket at the base? It seems I have to remove the whole base since the gasket is under the base.
|
||||
|
||||
|
Most of the time, the leak is caused by bolts. Do this: wipe off all water from the toilet bowl. Do not flush. Leave full tank of water stand over night. In the morning, see if there is wetness. If yes, bolts leak. If the bowl is dry in the morning - then flush several times and see if there is sign of wetness now. If yes, than it is the bowl gasket.
Hope that helps Milo |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Valve/Cover/Gasket Both Leak
[ 4 Answers ]
Once again just got my oil changed and the ticket said "Both Valve/Cover/Gasket Both leak and that the bottom of the engine is covered in oil. What does this exactly mean? Big Job here or nothing to worry about?
How do I replace a skimmer gasket on a gunite pool
[ 2 Answers ]
How do I replace the gasket on a skimmer in a gunite pool.
Do you need a gasket when you replace trip level
[ 3 Answers ]
Do you need a gasket when you replace trip level
How do I replace a skimmer gasket on a gunite pool
[ 0 Answers ]
How do I replace the gasket on a gunite pool?
Garbage disposal leak at mounting gasket
[ 3 Answers ]
I just installed a new sink and my wife wanted a new drainer basket, old one was a little scratched up. I purchased one that was compatible with my disposal. But I am having a leak at the mounting gasket. I can't seem to get the lower mounting ring any tighter. My wife wanted to know why I was...
View more questions Search
|
