Have a inground pool about 5 yrs old that we replace motor every yr,the wireing & amount of juice is OK it's the sealed bearings that start squealing an freeze up, 2ND ? The well pump is 220v / 2 wire direct to breaker ,its on or off nothing fancy an has worked for years except this yr ,runs...

I am installing a lawn irrigation system. I have an old irrigation pump 1 1/2 hp I picked up from an old system. I drove a 1 1/4" point down into a water table which started at 7 ft and I drove the point into it for an additional 8 feet. The well point is 36". The Well point is 8 feet into the...

My landscape irrigation pump is not working. We had unusually cold weather in North Florida this year so I suspect that may have been the catalyst. I was out of town for several months this winter and turned off the breaker for the pump when I left. There is power to the pump, but it just...

The installer put a Jet-Rite 2 well tank where the priming tee is. There does not seem to be anyplace where I can fill pump and piping with water. The pump has not been used in about 1 month and was unplugged. Now it needs to be primed and I don't know what to do! Can someone please help!