Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Instant hot water
[ 1 Answers ]
I am looking to install a new hot water system for pottable water only. I do not want to have a cistern or large heater. It has to be Electric and it has to feed 2 sinks and a tub/shower. Very low usage so I do not need the water heating up in a tank. Only needed when taps running. What is the best...
Instant Hot Water Heater
[ 1 Answers ]
Q: 1 I am installing a 2.5 gal Ariston instant hot water heater. The diagram shows a 3/4 NPT male temperature and pressure relief valve that needs a set up to discharge in the drain. I am in a rental and not able to access the plumbing in the wall. A. Is there a way to hook into the drain...
Instant hot water with PEX system
[ 1 Answers ]
Is there a way for me to get instant hot water to a faucet using a PEX manifold system? Or can I run the cold through the manifold and loop the hot?
Instant Hot Water dispenser vs. Side sprayer
[ 2 Answers ]
I want to add an Instant hot water dispenser to my stainless steel sink. It already has a side-sprayer through the hole I want to use to install the dispenser. 1) Can I use that hole & 2) how do I defeat the side-sprayer hose and eliminate it under the sink?
How do I increase H2O pressure on well system with a water filtration system?
[ 2 Answers ]
Howdy, I would like to know how I can increase my water pressure. My current system uses a well pump with a small pressure tank, and "D" control valve. It then runs through a WATERSOFT filtration tank, RAINSOFT water softner, and on the Hot water side, an AQUASTAR on demand hot water system. I... View more questions Search
|