Ask Experts Questions for FREE Help !
Ask
    csh654's Avatar
    csh654 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 17, 2010, 02:58 PM
    Installing sub pump for holding tank
    We have a pump for our holding tank. How is this to be installed and who installs it (plumber, electrician, well guy)?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jul 17, 2010, 04:32 PM

    Tell us more. Do you mkean sump pump? Will this pump be feeding the holding tank or pumping away from it? Is this a replacement or a new installation?
    More details please? Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What type of pump will work with out a pressurized holding tank for water supply? [ 3 Answers ]

I want to use a holding tank to supply fresh water for a flush and outside shower at my cottage in a bunk house. Is there a demand pump I can use instead of having a holding tank with a pressure switch? If so what is the pump called?

Do I need to install a jet pump, a pressure tank and a holding tank? [ 6 Answers ]

I have a new home with nothing but the 1inch well pipe stemed through the cellar wall. My house is not on town supply line. Do I need to install a jet pump that goes to the pressure tank which then sends water ot a holding tank? Or is the pressure tank by itself all that I would need? Or a...

New well pump vs. New holding tank [ 2 Answers ]

Hello all. This is our first house with a well & septic system. The well pump(submerged) is approximately 18 years old and has never been replaced to my knowledge. We are now experiencing very low interior house pressure when outside spigot is in use or when washing clothes, showering, etc....

Sewage pump clogs in holding tank [ 1 Answers ]

We have two new SK60 submersible sewage ejector pumps in our holding tank at a 28 room motel and they keep clogging up with things like plastic bags, string etc. . What can I do to prevent this?

Well pump takes 5 minutes to fill bladder holding tank [ 12 Answers ]

Last year we installed a new bladder holding tank. Pressure set at about 27 lb since pump turns on at 30LB. After installation pump was running a long time to fill pressure tank. If drawing water from multiple sources at one time once pressure dropped and pump went on it could not supply enough...


View more questions Search