Ask Experts Questions for FREE Help !
    tjking's Avatar
    tjking Posts: 1, Reputation: 1
    New Member

    Aug 22, 2007, 11:06 AM
    Installing a single lever shower faucet
    I need to know the names of the materials needed to install a new single lever faucet in a shower and instructions on how to install it starting from the rough in stage. I have the hot and cold supply lines capped off at this time.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber

    Aug 22, 2007, 05:27 PM
    Click on; Sower & Tubs -  -  800-PIPE-DOC
    To get instructions on roughing and piping a shower. More questions? I'm as close as a click. Good luck on your project, Tom

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

No Hot Water in Shower - Moen Single Handle Faucet [ 38 Answers ]

I've read most of the questions on this website about this matter, but I'm still confused. I pulled off the handle and wall plate. But what do I do after that? I see a small (4 inch approx.) hole in the wall with a "unit" that looks like a cartridge that holds the handle. I can turn it to hot...

Installation of single lever faucet on bath tub [ 1 Answers ]

How to replace the 2 handle faucets on a bath tub with a single lever faucet. How to install and what to use inside the wallwork plumbing.

Install Single Lever Shower Faucet [ 2 Answers ]

I am looking for information on installing a single lever shower faucet. This will need conversion from the existing 2-faucet that is there now.

Single lever faucet [ 1 Answers ]

After a year or so, the single lever kitchen faucet (which I believe is a Delta) we installed, will no longer switch to the cold water side. This just happened yesterday and we are unsure where to start looking for the problem. It is not under the sink, as we have looked at the connections and they...

Single lever shower [ 1 Answers ]

Plumbing Question! I have a single lever shower. The hot water comes out on the cold side, and the cold water come out on the hot side. How can I find a remady to fix this situation. I don't want to have to repipe the lines , unless it is necessary. Thanks for any advice.

View more questions Search