Ask Experts Questions for FREE Help !
Ask
    iliketea53's Avatar
    iliketea53 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 1, 2012, 01:34 PM
    Install p traps for shower
    I have a tub on slab and a drain running vertically out of the slab. The drain/overflow is approx. 8 inch. Away running horizontally. How do I fit a P-trap in without it being an S trap
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Aug 1, 2012, 01:39 PM
    Hi Iliketea53

    You need to break up the concrete from around the drain , dig down to the old PTRAP and relocate the drain so the new PTRAP lines up directly under the shower drain. However, if the PTRAP is deep enough, you may be able to offset the riser out of the old PTRAP using 45 degree fittings... will still need to break out some concrete and dig dirt!

    Be sure to check the manufacturer's installation instructions as some recommend setting the shower pan in a bed of structolite or mortar... a very important step to a good, long-lasting installation!

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower drain traps close dimensions [ 5 Answers ]

The shower drain has a narrow allowance between the height of the shower floor and the hard floor where the plumbing drain pipes are. Is there a smaller drain trap that doesn't have as much of a total height dimension?

How do I extend a 2 inch PVC shower drain to install new shower? [ 1 Answers ]

I am remodeling a previously tiled shower and replacing with a prefab composite shower floor. The existing drain appears to be cemented into the slab. Will I have to break the slab and remove the existing drain or is there a "magic" adapter that I can use to extend the PVC in order to connect it...

Proper shower pan install utilizing exsting basement shower drain [ 6 Answers ]

I am remodeling a basement bathroom. I demo'd the shower and its tile to reveal rotted framing. I believe this is due to an improper or (more likely) not existent shower pan -- there was no water proof membrane between the tile/thinset and the framing. Can I build a proper shower pan...

Build Shower Platform & Install Above Ground P-Trap in Basement Shower [ 1 Answers ]

Hello, I'm new to this site. I tried to find the answer in previous posts and did find some great info, but I still have some questions :) This is what I want to do: Install a corner shower with dimensions 36" in x 36" in the basement, build a platform, & add an above ground p-trap. ...

Best way to install fixed shower head and personal shower [ 4 Answers ]

I am installing a new shower setup. I want to install a fixed shower head as well as a hand held personal shower with hose. On the Kohler website they sell a diverter valve with some sort of backflow valve for this purpose. I have a friend who just had this done and he has no diverter valve just...


View more questions Search