Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing laundry tray faucet
[ 1 Answers ]
I'm replacing an old laundry tray faucet where the pipes were sweated on. I have to decide to purchase a new fixture for sweat or compression fitting. I'm not experienced at this at all. Will the hired plumber have to replaced the length of pipe because it will be too short once cut? Also if he has...
Laundry tray pipe leak
[ 1 Answers ]
Hot water dripping from faucet in laundry tray.
How do I unclog laundry tub pump
[ 0 Answers ]
There's a garbage disposal like contraption connected to the drain of the tub that my washing machine drains into it usually works automatically but it does have a switch for manual operation. My problem is the machine seems to be clogged bcus water won't go down the drain and I can hear the pump...
Deteriorated Insulation on Heat Pump Exchanger and Drip tray
[ 0 Answers ]
I thought my drip tray for my heat pump exchanger leaked (turned out it was the water heater and not the heat pump system.) Anyway, I opened up the duct work and removed the drip tray for cleaning. It was full of deteriorated insulation and the exchanger above had remnants of insulation on the...
Tray pump quit
[ 1 Answers ]
I have a pump hooked up beneath my sink in the basement which handles the discharge from the washing machine, (as well as the water from the sink). It is less than one year old and I never had any problems with it before. Last night it just stopped working. Water is now leaking from the middle of... View more questions Search
|