Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hole in floor is larger than closet flange, and the flange may be too low
[ 3 Answers ]
We recently put down ceramic tile in one of our bathrooms. A friend of ours did the job for almost nothing, as he had most of the required supplies left over from another job, including tile. Now there is water leaking from the base of the toilet. After scouring the DIY sites on the internet, I...
How can I extend a closet flange that's in concrete?
[ 6 Answers ]
I've got to raise a bathroom floor about 12" to allow for some drain lines. The original floor is concrete and I'm not moving the toilet's location. Is there a way to attach to the existing closet flange and extend the pipe up to the new floor level without jack-hammering around the flange, cutting...
Attaching A Closet Flange to Concrete?
[ 9 Answers ]
What I have is a bathroom I'm trying to remodel, I have removed the toilet in my 1976 home and found that I have a Cast iron 4" pipe and a cast iron Closet flange thats Shot, and I might add is not attached to anything at all. Also found that the original toilet had a piece of 1/2" treated Plywood...
Installing Closet Flange on Concrete floor
[ 3 Answers ]
I'm installing a basement bath and have a ceramic floor installed up right around a 4 inch PVC soil drain for my toilet. The floor is laid directly on the concrete. I intend to use a flange that can be glued inside the 4" PVC for the toilet. I'm wondering if the concrete flooor will give enough...
Closet flange below floor
[ 1 Answers ]
First of all, great forum! I am installing a new toilet, but the floor has been built up over the years- two different times with 3/4 inch plywood panels. The original flange was never raised when this was done. I stand about 6'4" tall and my aim has gotten pretty good over the years, but as I age,... View more questions Search
|