Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to replace Symmons diverter Handle part T-30?
[ 6 Answers ]
This piece is made of plasic and broke off at the 90* neck angle. (at least it is stuck on shower mode which, if it had to break, is what I would prefer.) I have ID'd the part # but have a couple of quesitons about replacing it. First, how difficult is this for the average joe? I have a diagram...
John deere spindle replacement
[ 7 Answers ]
I have a John Deere X300 and did some " stump grinding"by mistake and cracked the Spindle on the mower deck (42"). Last time we did this the deck cost almost $1000 (USD) to repair and the dealer said cannot repair have to replace. The spindle is a $53(USD) item... I just want to know where to...
Spindle to handrail attachment
[ 1 Answers ]
Hello, I’m in the process of installing new deck handrails and went with the pre-cut for spindles type of railing. (They have square holes routered out to seat the spindle in) In theory I figured it would simply be a matter of installing the pre-cut rail on top and flip one over for the bottom to...
Repairing MTD mower blade spindle
[ 4 Answers ]
I have a 6 Y/O MTD riding mower. The spindles appear to have gotten rusty over the winter and don't turn freely (stored in a garden shed). I have already broken the belt due to the increased friction. I need to know how to remove the deck and if the spindles can be repaired or if they need to be... View more questions Search
|