I have followed instructions for disassembling the faucet in order to replace the washer (to stop dripping). However, after removing the packing nut, I cannot seem to get the valve stem assembly to come out by turning clockwise (also tried the other direction). I tried grip lock pliers, but it...

I saw this same question but the answer was not helpful. We have removed the collar and plate and using a shower valve socket wrench we are unable to remove the Diverter stem for the shower (Gerber). Any suggestions? We were also unable to remove the hot water seat with a seat wrench.

I've been fixing leaking faucets in a bathroom. There are total six faucets in a bathroom, Two made into a bathroom basin, two made into the wall in the shower tube And the last two are on the wall on top of the mop sink. I have fixed the leaks with basin's faucets but was unable to do it...

I have a Delta shower faucet and I'm trying to replace the springs and seals. The problem I have is that the locking cam is "locked" in place and I can't remove it without breaking the solder joints on the copper pipes.

Hi! I have just installed a new Danze kitchen sink faucet, the one that came with a pull out spray and soap dispenser. The first time I installed it, it worked perfectly well. I had to remove it because of some necessary adjustment to the sink, but upon installation, it because so difficult to...