Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I remove a glued PVC pipe from a cast iron pipe drain in my bathroom?
[ 2 Answers ]
I have a very old house and have a cast iron pipe as the largest part of my waste drain in the bathroom. I want to place my toilet in a different area of the bathroom. If I want to do this, I have to remove the pvc elbo that is connected into the cast iron pipe. Is there an easy way to remove...
How to remove glued ABS P-Trap elbow
[ 1 Answers ]
I need to remove p-trap elbow, glued to drain pipe 40 years ago. It is leaking and there is not enough drain pipe left to just cut it off. I would be even hard to drill into cement around drain pipe to get more of it out to glue new p-trap elbow. Any advice will be appriciate. Thank you very...
O-ring vs Glued PVC
[ 3 Answers ]
Our well is 600 ft from the house and I will be running 2 inch PVC the entire distance. The local plumbing place said that long of a run I should use O-Ring pvc and not glued pvc in case there is any ground movement. They cary both and the price is about the same. We live in southern Oklahoma...
Can abs and pvc plastic be glued
[ 2 Answers ]
Can I repair abs plastic pipe with a pvc coupler in a waste line?
Changing out PVC P-trap to decorative P-trap
[ 10 Answers ]
My husband and I are in the process of changing out a vanity in our guest bathroom and I have a few questions. We removed the old vanity and had to cut the old p-trap off with a hack saw. We are replacing with an open vanity so now the pipes will be exposed. I want to tile half way up the wall,... View more questions Search
|