Ask Experts Questions for FREE Help !
Ask
    alice7400's Avatar
    alice7400 Posts: 3, Reputation: 1
    New Member
     
    #1

    Apr 13, 2012, 11:42 PM
    How to remove glued ABS P-Trap elbow
    I need to remove p-trap elbow, glued to drain pipe 40 years ago. It is leaking and there is not enough drain pipe left to just cut it off. I would be even hard to drill into cement around drain pipe to get more of it out to glue new p-trap elbow. Any advice will be appriciate. Thank you very much.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Apr 14, 2012, 05:30 AM
    You didn't say what fixture the "P" trap serviced. I'm guessing bath tub. Correct? You don't just remove the elbo. You cut out and replace the entire trap. If you have to chip cement back to get more pipe to couple to and extend then that's what you'll have to do. Let me know if there's more questions.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing glued ABS fitting to ABS piping [ 5 Answers ]

I glued an ABS toilet flange to ab ABS pipe roughing. The fitting did not go down all the way and is 1/2" proud of the tile flooring. I now want to remove the fitting and replace with a new fitting. How do I do it without damaging the receiving pipe. Pipe is in concrete floor. Thanks, Bob

How can I remove carpet tack strips glued down on stairs? [ 4 Answers ]

HELP PLEASE?! I wish to remove the very old, dust laden :eek: carpets located in the front stairwell. I lifted up a corner and see that there are wooden tack strips that are glued down VERY VERY tightly. I tried to pry one up and it was absolutely impossible. I would greatly appreciate any tips...

Can abs and pvc plastic be glued [ 2 Answers ]

Can I repair abs plastic pipe with a pvc coupler in a waste line?

Removal of Flange Glued on top of ABS Pipe [ 3 Answers ]

How do you remove a plastic flange glued on top of ABS Pipe? The metal around the flange has rusted and more than half is broken off with the foundation. The old flange is made of some sort of plastic and is glued right on top of the ABS pipe but it's not perfectly in line with the pipe so the...

P trap elbow for tub [ 2 Answers ]

Hello, I am installing a new tub and the PVC waste drain has an elbow directly below the tub with a screw on fitting in the elbow. I am assuming this is the p-trap. Will this leak if I simply tighten it? Do I use any kind of glue or putty or teflon tape in this area? It seems like simply...


View more questions Search