Ask Experts Questions for FREE Help !
Ask
    corney6546's Avatar
    corney6546 Posts: 9, Reputation: 1
    New Member
     
    #1

    Feb 20, 2012, 03:00 PM
    How to remove basket-type drain assembly from older jacuzzi
    This drain has a cable operated stopper, controlled by turning the overflow unit about a half turn to seat the stopper... By looking under the tub I can see a large nut under the assembly but if this nut hold it in place I'm completely baffled as how they installed it as there is not sufficient clearance twixt the floor and the tub bottom to get a wrench in there let alone a hand.
    Only ID of the tube brand or model is a decorative escutcheon on the lip of the tub inscribed ALMICO in large letters under which the words COMFORT and ELEGANCE follow in flowing script.
    I would guess this tub to be 15 or 20 years old..
    Any tips or suggestions would be much appreciated... Tthanks for your interest... CORNEY
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Feb 20, 2012, 04:49 PM
    Hi Corney...

    If this is a typical cable operated unit (see the image) you'll need to remove the basket strainer (#11 in picture below) itself... it unscrews!

    If there is a cross bar in the basket strainer you may be able to use two screwdrivers and insert them into the basket strainer and then crisscross them across each other and spin the basket strainer out. Alternatively, you could purchase a "tub-drain removal tool" (see image) and insert that into the basket strainer and unscrew the basket that way.
    Attached Images
      

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I use plumer putty when installing a new drain basket on aprocelain kitchen sink? [ 2 Answers ]

Can I use plumer putty when installing a new drain basket on a procelain kitchen sink?

Remove headlamp assembly ford ranger [ 0 Answers ]

Just trying to remove the plastic headlamp/parking/turn signal frame from in front of the headlamp assembly.

Bathtub drain basket won't fit. [ 4 Answers ]

The new bathtub drain basket won't fit the opening on my 50 year old tub. The opening is too small. What should I do? Do they make drain baskets with a smaller diameter?

Remove stuck basket from cast iron utility sink [ 5 Answers ]

We were moving a old cast iron utility tub and needed to replace the drain pipes. When trying to loosen the nut locking the basket to the tub the pipe broke at the top of the locking nut, flush with the bottom of the tub. Now the only thing holding the basket to the tub is 50 or more years of...

Sink strainer basket won't budge. Can't remove it. [ 2 Answers ]

I am trying to remove the sink strainer basket from my kitchen sink because it is old and rusty. I was able to remove the nut and rubber washer from underneath, but now the strainer will not come out. I have hit it from underneath to try to nudge it, but it will not move. I have sprayed liquid...


View more questions Search