Was wanting to frame in a small shower in basement. I was planning on just building a platform for it underneath for the drain. I have an old cast iron crock that has always been used for the washing machine drain as long as I can remember. My question is, can I just run my shower drain to dump...

It looks like the drain pipe is soldered in and I suspect the gasket on the underside of the shower pan is leaking. Any suggestions will be appreciated.

I am installing a new shower floor pan directly over an existing floor drain set in concrete. Is there an adapter I can use to connect the floor drain to the new shower drain in the floor pan?

I have a 8 in. floor drain in my basement that sits about 6 inches below the rest. It is being used for a open shower and now I am wanting to put a porcelain shower base. Need to know what I needed to do. House was built in 1972

I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent...