Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I am replacing my kitchen faucet and can't loosen the cold water nuts
[ 1 Answers ]
I have gotten the hot water pipe loosened from the faucet but can't get the cold water one off. I have lubricated it and it is such a tight space I can't get pliers or wrenches on it. What do I do?
Grohe LadyLux Pro faucet replacing water supply line
[ 0 Answers ]
Hi I have a LadyLux Pro faucet with a damaged water supply line. I've managed to unscrew and remove the line from the body of the faucet but am not sure if this is a standard part. Is the fitting a standard that I can get from a local supply house or do I need to go directly to Grohe? Do...
Supply hoses on new kitchen faucet do not match existing water lines
[ 3 Answers ]
What do I do now:(
Bad Faucet or Water Supply Valve?
[ 8 Answers ]
I have a one-handle bathroom sink faucet (Moen, original to the house, 12 years old). In the last few weeks, I noticed the faucet drips, so I put a bucket under it to see the volume. After about 10 hours, I was getting a liter or more of water. Having no plumbing knowledge (and my father...
No cold water supply to faucet
[ 2 Answers ]
Hi Folks I have an upstairs half bath with washbasin in. The other day, the cold water stopped supply working. I've tasted taken the feed pipe from the cut-off valve and tested to see if the water is being fed to the valve by turning it off and on, I don't get any water through the valve. Anyone... View more questions Search
|