Ask Experts Questions for FREE Help !
Ask
    Anna Tysor's Avatar
    Anna Tysor Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 12, 2012, 05:13 AM
    How to get a shower plunger unstuck in the faucet assembly
    Plumbing in bathroom:

    Faucet has a knob that you push down to use the tub and up for the shower, but it is stuck in the up position.

    I have tried CLR and PB blaster to no avail and also a hammer, but nothing works.

    What can I try next??
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Aug 12, 2012, 05:52 AM
    Is this knob on the faucet or on the tub spout?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Aug 12, 2012, 06:28 AM
    Sounds like the spout to me.(see image). These spouts are so inexpensive that we don't repair them. We simply replace them. There are two types of diverter spouts. The threaded type and the slip on type. To tell what you have look at the bottom next to the wall. If it has a small square opening then you have the slip on type. Pick one up at any big box store and replace your old one. Or do you have a three knob faucet with the diverter in the center? (see image) good luck, Tom
    Attached Images
      

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leaking Shower/Bath Faucet. Replaced Stem, Assembly [ 0 Answers ]

Hello, I have leaking in my bath/shower faucet. It is a Danco kit. I believe the original was Bradley-Cole. After removing the stem, my old one had a hole on the end rubber piece. So I was pretty confident replacing it would fix it. After replacing it a pretty hard stream went to completely...

How to remover plunger that got separated from trip lever assembly [ 1 Answers ]

My plunger got separated from the trip lever assembly. How do I get the plunger out?

Bathroom Plunger stuck, looks like a hard water issue, how can I get it unstuck? [ 4 Answers ]

Hi I just bought a house and my bathtub plunger is stuck, so I am unable to use it for baths. I popped of the lever and attempted to pull the plunger up, but was unable to. The water is from a well and pretty hard which I think may be causing the plunger to be stuck, can you guide me to how I cn...

Tub drain plunger separated from trip lever assembly [ 1 Answers ]

I had a plumber fix a tub drain plunger. Apparently, instead of fixing or adjusting the old type (lever to visible stopper), he must have replaced it with a newer type (lever to internal stopper). Problem is that the lever is now disconnected from the internal stopper. The eye hook at the bottom of...

Delta Shower Faucet assembly diagrams [ 27 Answers ]

Where can I find the Delta Shower Faucets assembly diagrams online? Thanks, Brian


View more questions Search