I've got the Seats & Springs to fix a leaky Delta Monitor 1400 Series faucet (and the water is turned off), and am stuck at the very beginning. The handle is a single lever, it appears that the Set Screw is missing. I've tried twisting the lever and pulling without success - not knowing which is...

So I have a single handle shower made by Kohler that is only 2 years old. I have regular water pressure from the tub faucet but the shower when turned up hot has a diminished flow. When you turn the sink or flush the toilet in the same bathroom the pressure is actually much better. I adjusted the...

I am getting no hot water from my Moen single handle shower valve. I have plenty of pressure from cold water side. I removed the main handle to expose the valve. The hot water pipe has a small valve with a common head valve stem which I turned, hoping to unblock the valve, but this had no...

I am installing a new shower valve (new construction) using PEX tubing, the tubing won't support the valve and the valve has no mounting tabs. What is the best way to anchor the valve body?

I have a Moen single handle valve in my bathtub. The tub spout has a diverter on the top to change it to shower mode. Recently I tightened the screws on the cover plate where the handle attaches to eliminate slack which was causing the tub spout to move (and pull caulk away) each time the shower...