Ask Experts Questions for FREE Help !
Ask
    rbarquero's Avatar
    rbarquero Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 3, 2014, 06:50 AM
    How do you install 1/4 compression couplings on a waterline
    How do you install 1/4 compression couplings on a waterline?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Aug 3, 2014, 07:21 AM
    Copper or plastic? Tom
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
     
    #3

    Aug 3, 2014, 08:44 AM
    Here is a good video to watch.

    https://www.youtube.com/watch?v=aFpZfr0YQ28

    Please note how clean and prepared the tube ends are before applying the compression rings.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #4

    Aug 7, 2014, 02:12 PM
    Talaniman,

    Excellent Youtube, Thanks.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to install Underground waterline to garden [ 4 Answers ]

I would like to install an underground water line to a small garden about 200' from the house to wash tools and provide some irrigation in dry spells. Would 1/2 flexible pipe be OK? What kind of pipe should I ask for at Home Depot? Thanks in advance for your time.

Fernco Shielded Couplings & Neoprene Couplings [ 1 Answers ]

What are the difference in these two? Any Benefit in using a shielded coupling over the neoprene? Back story - What I'm trying to do is move a toilet. It is literally 3 inches from a wall, and also is 4 inches higher than the floor. The main stack came up through a concrete wall, so I believe...

Cutting into a half inch copper tube to install a compression shutoff valve [ 1 Answers ]

I need to cut just enough 1/2 inch copper tubing to install a compression shut off valve for a shower supply line. The valve will be installed directly into this cut.

How to install compression valves for toilets [ 1 Answers ]

I need to install a compression valve to my copper water supply pipe in order to make the appropriate size for my risor attachment. Since I am not a plumber and have not attached a compression valve previously I'm a little concerned about the process. The c-valve does not have thread at the point I...

How can I install compression valves on pex tubing? [ 3 Answers ]

I am more than familiar with copper plumbing installation and repair, but I am new to pex tubing. Our house right now is in the state of flood repair after our town was devastated by flood waters on August 19 2007. Volunteer plumbers installed all new pex tubing, and we cannot afford the expensive...


View more questions Search