Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to Disassemble cast iron pipe joint
[ 5 Answers ]
How do I separate cast iron pipe at a joint and save the hub? There is a cleanout plug in the end of the run that I want to remove to add the line from a new bathroom. I would like to use the rubber bushing type connector that is driven into the hub and reduce the size at this point to 3". The...
Disassemble washer drier combo to use only dryer
[ 0 Answers ]
How do I disassemble my Kenmore washer drier combo. The washer is not repairable (it will cost more to fix the washer then to purchase a new one, however the drier still works fine and would like to continue using it if possible? I wondered if I could unstack it, remove the washer and continue...
Hampton bays fan how to disassemble
[ 3 Answers ]
Okay well I thought my fan broke because I went to home depot and they guy told me its not the remote since the tiny blinking light still worked on the remote. It was the box thing on the inside of the fan.. now I'm trying to change the box and I took off the light part and I'm on the part...
Disassemble bath tub drain
[ 2 Answers ]
I have a cross metal piece near the top of the drain and I have hair buildup between the cross and the trap. Is the top of the drain a threaded piece? If so , what tool do I use to take it apart? I can't fit a bent wire down through the X. Hope this is clear. View more questions Search
|