Ask Experts Questions for FREE Help !
Ask
    Jasonrit's Avatar
    Jasonrit Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2010, 03:56 PM
    How do I replace a stripped out seat?
    While trying to remove the seat to replace it with a new one it was so old it stripped out instantly. It is visibly damaged and needs to be replaced. Is there a way to get it out?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Dec 18, 2010, 03:58 PM

    Jason, what are you working on?
    argaiu1017's Avatar
    argaiu1017 Posts: 92, Reputation: 8
    Junior Member
    		  
    #3

    Dec 18, 2010, 07:54 PM
    Hi,

    I am picturing that you are talking about a valve seat. If so, what I have done and used is a tiny saw blade. Just be patient and don't cut through the threads. When u cut it thin use a tool and knock it loose.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Dec 19, 2010, 06:19 AM

    Hi Jason...

    Go to home depot and see if they have a 1/4" EASY OUT extraction tool. Install the easy out into a hand-held drill and push down real hard as you turn the drill on. Most of the time, this will work.

    If that fails to work you can try a MINI-HACKSAW blade... takes some doing, but this will work if you take your time.

    Let us know how you make out, OK?

    Mark
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Stripped out seat in shower faucet [ 2 Answers ]

I bought a seat wrench from my local hardware store to remove a seat that is chipped in my shower. I used the wrench on the seat and it was so old (my guess is 15 years or so) that it just stripped out the metal and now I can not get the wrench to turn it at all. I have called a few plumbers and...

Stripped faucet seat? [ 7 Answers ]

Okay, so we put in new a faucet seat but the shower still leaks. Having trouble screwing in the new seats. I think the problem is that the piece that it screws into is stripped... what can I do?

How do I replace a needle valve seat on a BS 14? [ 3 Answers ]

I have BS 14 HP with a float type carb. I know the needle is sticking and flooding the engine/ oil/ ground with gas! I have ordered the new needle valve and seat. My question is how do I get the seat out? Does anyone have any information about how to remove one? Help please... Mower parked in...

View more questions Search