Ask Experts Questions for FREE Help !
Ask
    jacques52's Avatar
    jacques52 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2010, 06:49 PM
    How do I remove cold water spindle from shoer body
    I have a leaking cold water spindle on the shower body in the tub . How do I remove it to see what's causing the leak?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Jul 4, 2010, 08:14 PM

    1. Close water off for the whole house
    2. Remove handle and trim
    3. Take plumber's socket set, select correct size socket and insert it over the stem
    4. Unscrew stem
    5. Replace washer and seat
    6. Reinstall stem, trim, handle
    7. Turn water back ON

    Project completed ! Let us know how you did... Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cold water in hot lines. If I turn the hot water supply off, I still get cold water [ 1 Answers ]

I recently purchased a rental house. I replaced the hot water heater and shut off valves. With the shutt-off in and out of the tack are closed, I still get cold water from the hot side of all faucets in the house. When valves are open, and temp. Set at very hot, I get semi-hot water.

I have cold water downstairs but no hot or cold water upstairs [ 1 Answers ]

I have water coming into the house as I have cold water in the downstairs tap but I have no hot water upstairs in the taps and no water in the toilet but there is water in the tank any suggests

Cold water feeding back into cold water stoarage tank [ 3 Answers ]

Can someone please help me and my plumber who also appears flummixed by my problem My ocld water storage tank is overflowing - OK you say - fix the overflow Done it Problem seems to be that the water is feeding back in to the tank Plumber says it not my coil in the cylinder and I have new...

Trying to remove spout from body on kohler k-10412 [ 5 Answers ]

Hi I am trying to replace o rings and bearings from a kit kohler sent me for a leaking faucet. I have removed handle bonnet and valve no problem The instructions say "Hold the base of the spout and pull up to remove spout from body" when I try to do this it comes up approx 1/4" and then stops I...

How to increase water pressure low at master shower is it the shoer head or faucet [ 4 Answers ]

What is causing low water pressure at master shower faucet or shower head what can be done to correct

View more questions Search