Ask Experts Questions for FREE Help !
Ask
    sherriberry's Avatar
    sherriberry Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 20, 2008, 11:33 AM
    How do I prime my water pump?
    Hello
    I live in a rental property with one water source that supplies 2 units. Our power went out today and now the water does not work. The pump will need to be primed now to get the water running again, but I'm not sure how to do that. I cannot get in touch with the landlord right now and I know I can do this myself with the right instructions. I would really appreciate some info.

    Thank You:)
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jan 20, 2008, 03:53 PM
    Assuming that this is a jet pump (above ground), there will be a plug on top of the pump housing, or sometimes it will be a pressure gauge. At any rate, turn off the pump (turn off breakers), unscrew the plug/pressure gauge, pour in water until full, replace plug, and turn on pump. Not difficult.

    Good luck.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jan 20, 2008, 04:01 PM
    Great advice by jlisenbe. Follow it and you won't go wrong. Please allow me to add a little to it. When you pour water inti the hole on top of the impeller cage you should be able to fill it up to overflowing. If you can't then you may have a faulty check/foot valve that allows the prime to flow back down into the well. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you prime a pump? [ 5 Answers ]

Can somebody tell me how to prime a sprinkler pump the right way? I have 2 cut-off valves on my system. The first one leads to the pump, and the other valve leads to the cylinder shaped thing with the five tubes on it... My question is: do I close the 2nd valve and open the first valve to let water...

Well water pump-how to Prime or bleed it? [ 7 Answers ]

:confused: :confused: When running the water.. every few minutes.. it will stop for a few seconds.. and you will hear it start up again. This has just started to happen in the last few months.. and I was told it might need to be primed or blead. I have no idea how to do this! Will I need to contact...

Water pump will not prime [ 2 Answers ]

My outside water pump will not prime. I loose prime every time the eltric goes out. Please help. I have no water.

Prime water pump [ 1 Answers ]

Please let me know how to prime a well water pump? Thank you, Luz

View more questions Search