I need to connect a "T" to an 1.5" underground pvc pipe. To fit properly a 1" space must be cut in the pipe. The "T" is obviously larger than the opening, how can this be done?:mad: :confused:

I just ran my 100Amp #2Ga - 4 conductor wires (which all 4 conductors were in a jacketed cable) in a 2" PVC pipe, from my new Sub Panel to the main 200A house panel in the garage (only about 6 ft in the PVC pipe, the rest of the run is in the wall) My question is, I need to run another 12/2...

We are trying to install a water system in our home and need to know how we go from copper pipe to pvc pipe.

While drilling a hole to hang a towel rod in a first floor bathroom, I drilled into the PVC waste line that comes from the upstairs bathrooms. I cut away a section of the drywall and can see I hit almost dead center into a 2 or 3 inch PVC waste line. The hole is approx. 1/2" in diameter. Is there...

This site doesn't have enough traffic. So here's a max/min for those who would like to try. Maybe you've seen something similar before. "A pipe of negligible diameter is to be carried horizontally around a corner from a hallway 8 ft wide into a hallway 4 ft wide. What is the maximum length the...