Ask Experts Questions for FREE Help !
Ask
    redwind51's Avatar
    redwind51 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2014, 12:23 PM
    How do I adjust water level and float with a Fluidmster 400 Model/M25012?
    Adjusting water and float in toilet
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 2, 2014, 12:32 PM
    a
    Fluid Master ballcock you can adjust the level by squeezing the steel piece on vertical wire arm at the side, pulling the can up and down down. pull the can up to raise the tank level and down to lower it. Did that answer your question ? Tom
    Attached Images
     
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #3

    Aug 2, 2014, 02:16 PM
    Top state it correctly also please open the link below watch the clip will give you more info, Thanks.

    John

    https://www.youtube.com/watch?v=gOSO5a0teIQ
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Aug 2, 2014, 06:36 PM
    Some of the 400 series have a screw adjustment, a long black threaded screw you turn. Tighten to raise, unscrew to lower the water level.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I adjust the k-salt usage level in my rain soft whole house system. Inst. 1999 [ 0 Answers ]

My rain soft system was installed in 1999. I would like to know how to adjust the k-salt usage in the system. It uses about 80 lbs in 2 months. Thank you. Distort

What level of sales would generate $2,633,400 in net income? [ 0 Answers ]

Income Statement Hermann Industries is forecasting the following income statement: Sales $11,000,000 Operating costs excluding depreciation & amortization 6,050,000 EBITDA $4,950,000 Depreciation and amortization 1,540,000 EBIT $3,410,000 Interest 1,100,000 EBT $2,310,000

Screeching Fluidmaster type 400 Float valve [ 8 Answers ]

Hi About 8 months ago I fitted Fluidmaster type 400 Float valve to my toilet cistern. It has recently started to make a (loud) screeching noise at the start of the flush. Any thoughts on cause and cure. Cheers David:)

How do you adjust float on 2 cycle Craftsman snow blower? [ 0 Answers ]

Water tank float valve won't shut off water supply [ 21 Answers ]

It's me with another plumbing question. It's at a house that I am part owner of but which is 5 hours from my house. I am not there, but I know the approximate setup. So there's this 800 gallon wooden water tank that stores water for a small house. The water is pumped from a cistern (supplied by...

View more questions Search