I have a double master bathroom vanity with 2 2 sinks. On one side, the hot water valve closes by itself, it's a push/pull plastic unit, and the other sink is fine. What causes the hot water valve to close (push out) the valve button constantly. I have to push the valve button back in for the hot...

The water shut off is a pull and push type, pull up to turn off and push in to turn on is this and all in one piece, I can't figure out how to disconnect the line from the shut off

My bathroom sink has push/pull pvc type shutoff valves with the hoses factory crimped on. The hoses are leaking at the crimp. Can the hoses be cut and replace the crimps with hose clamps or do I need to replace the calve. If the valve has to be replaced, Is it threaded or glued on? It is so close...

I tired turning it off at the valves under the sink, but it would not turn off. I had to turn it off at the hot water heater. So it would stop. It's no longer runnig but how do I fix it. It's older, I don't know the brand.

Hi. I have Moen crystal looking single facuets (I don't like) that are about 7 years old, came with the new house. They started getting dirty and so I took the handles off and cleaned them with soap and a scum cleaner and used a screwdriver to get some of the "plaque" out. Now, even after...